AXH series cyclic stirring ball mill

Summarize：
The AXH series circulating stirred ball mill is a type of machine that combines a stirred mill with a large-capacity premix and stirred tank. It uses a pump for high-speed circulation to achieve rapid grinding effects and a narrow particle size distribution. The rapidly circulating materials pass through the intense grinding medium layer in the stirring ball mill chamber. This phenomenon is conducive to achieving a narrower particle size distribution, allowing smaller particles to pass through quickly, while relatively coarser particles need to stay for a longer time, and it has a preferential crushing effect on coarse particles. Circulating stirred mills are typically used for grinding materials with dimensions reaching the micron level, high quality requirements, and those that are difficult to grind and disperse.

The AXH series machines can automatically switch between the two stirring barrels. Their feature is that they can achieve a very narrow particle size distribution after grinding. The investment in grinding media and grinding chambers is relatively small, but they can handle a large amount of materials. The slurry can be continuously monitored. Other formula components can be added to the premixing tank at any time during the grinding process, and more sensitive components can be added near the end of the grinding. Because the slurry stays in the grinding chamber for a very short time and spends most of its time in the premixing cylinder, it has better temperature control.

Grinding cavity option：
Grinding chamber lining: Ceramic (alumina, zirconia), ceramic tiles, wear-resistant nylon or polyurethane can be selected as the lining.
Stirring arm sleeve: Polyurethane, tungsten carbide, nylon or zirconia, etc. are available as options.
Upper cover: It can be equipped with a floating shaft seal to reduce solvent loss or for inert gas protection.

Technical specification