This screw conveyor is suitable for the transportation of bulk materials in chemical, metallurgical industrial enterprises, papermaking, construction engineering and other industries, such as cement, coal powder, carbon black, soda ash, flour, grains and pulp, etc. Because this machine can be moved freely and can continuously convey materials at any position, including horizontal, inclined and vertical, it is particularly suitable for field mobile operations, such as concrete mixing plants and bulk material storage and transfer, where its advanced nature and superiority can be especially demonstrated.
Characteristic：
A stable negative pressure is generated by the fan to directionally draw the dust raised during material feeding into the filtration system. After the dust is retained by the filter element, it is cleaned by the pulse reverse blowing device. The material is recovered to the silo or screening device, and the clean air is discharged up to standard. There is no dust overflow and no material waste throughout the process.
The LX series screw conveyor is a non-foundation fixed type. It is composed of a drive motor, a reducer, a casing, a tube and a screw body connected in sequence and combined into a whole.
The shaft end and the helical body are connected by involute splines (or rectangular splines), which is convenient for installation and disassembly, has a large load-bearing capacity, and is safe and reliable.
The casing of the conveyor is made by connecting each section into a whole through flanges with steel pipes. Therefore, it has good overall rigidity, allowing for the free selection of working positions and postures, and can be disassembled, assembled and moved at will.
The inlet and outlet ports can be made to the required inclined angles according to the on-site working conditions and can be connected and fixed with other supporting equipment.
The helical blades of this machine are made of integral connected blades formed by rolling disc-shaped steel strips. They feature high precision of the helical surface, precise inner hole, outer diameter and helical distance dimensions, and excellent conveying conditions. (If single-piece welded blades are used, the above requirements must be met.)。
Characteristic
Dust-free and environmentally friendly: High dust interception efficiency, in compliance with industry standards such as GMP and FDA, protecting the health of operators and the workshop environment.
Material recovery: The reverse blow cleaning design enables the recycling and reuse of dust, reducing material loss.
Strong adaptability: There are two types, namely the material separation bin type and the integrated feeding and screening type. They can be connected to downstream equipment such as vacuum feeders and mixers, and support feeding for small bags/ton bags.
Easy to operate and maintain: Simple structure, filter element can be disassembled, washed and replaced. The operating noise of the equipment is ≤75dB, and there are no dead corners for cleaning.
Performance：
This model can be used for conveying materials in all situations where they are suitable for screw transportation. It can continuously convey materials in horizontal, inclined or vertical states. Especially when conveying materials in an inclined or vertical manner, it can be directly connected and fixed to the equipment it is matched with, without the need for a foundation, making full use of the space.
It has excellent sealing performance, with no dust or pollution leakage, which not only avoids material waste but also creates a good working environment.
Its spiral body has a small diameter, high rotational speed and large conveying capacity, making it particularly suitable for inclined and vertical conveying.
